pengertian BOD?

Biological Oxygen Demand (BOD) is a measure of the oxygen used by microorganisms to decompose this waste. If there is a large quantity of organic waste in the water supply, there will also be a lot of bacteria present working to decompose this waste. In this case, the demand for oxygen will be high (due to all the bacteria) so the BOD level will be high. As the waste is consumed or dispersed through the water, BOD levels will begin to decline.
Nitrates and phosphates in a body of water can contribute to high BOD levels. Nitrates and phosphates are plant nutrients and can cause plant life and algae to grow quickly. When plants grow quickly, they also die quickly. This contributes to the organic waste in the water, which is then decomposed by bacteria. This results in a high BOD level. The temperature of the water can also contribute to high BOD levels. For example, warmer water usually will have a higher BOD level than colder water. As water temperature increases, the rate of photosynthesis by algae and other plant life in the water also increases. When this happens, plants grow faster and also die faster. When the plants die, they fall to the bottom where they are decomposed by bacteria. The bacteria require oxygen for this process so the BOD is high at this location. Therefore, increased water temperatures will speed up bacterial decomposition and result in higher BOD levels.
When BOD levels are high, dissolved oxygen (DO) levels decrease because the oxygen that is available in the water is being consumed by the bacteria. Since less dissolved oxygen is available in the water, fish and other aquatic organisms may not survive.
Test Procedure
The BOD test takes 5 days to complete and is performed using a dissolved oxygen test kit. The BOD level is determined by comparing the DO level of a water sample taken immediately with the DO level of a water sample that has been incubated in a dark location for 5 days. The difference between the two DO levels represents the amount of oxygen required for the decomposition of any organic material in the sample and is a good approximation of the BOD level.

1. Take 2 samples of water
   
2. Record the DO level (ppm) of one immediately using the method described in the dissolved oxygen test.
   
3. Place the second water sample in an incubator in complete darkness at 20 °C for 5 days. If you don't have an incubator, wrap the water sample bottle in aluminum foil or black electrical tape and store in a dark place at room temperature (20 °C or 68 °F).
   
4. After 5 days, take another dissolved oxygen reading (ppm) using the dissolved oxygen test kit.
   
5. Subtract the Day 5 reading from the Day 1 reading to determine the BOD level. Record your final BOD result in ppm.

What to Expect

BOD Level (in ppm)	Water Quality
1 - 2	Very Good There will not be much organic waste present in the water supply.
3 - 5	Fair: Moderately Clean
6 - 9	Poor: Somewhat Polluted Usually indicates organic matter is present and bacteria are decomposing this waste.
100 or greater	Very Poor: Very Polluted Contains organic waste.